4. Arduino Tutoriel
=============================

.. toctree::
    :maxdepth: 2

    
    4. Arduino



4.5 Arduino - Projets
-----------------------

|image1|

**Note : Dans ce cours, l'interface de chaque capteur/module marqué avec (G, -, GND) indique la borne négative, G est connecté à G ou GND du shield capteur ou de la carte de contrôle ; “V” est la borne positive et connectée à V, VCC ou 5V.**


.. toctree::
    :maxdepth: 2

    
    Project_01_LED_Blink
    Project_02_Adjust_LED_Brightness
    Project_03_Line_Tracking_Sensor
    Project_04_Servo_Control
    Project_05_Ultrasonic_Sensor
    Project_06_IR_Reception
    Project_07_Bluetooth_Remote_Control
    Project_08_Motor_Driving_and_Speed_Control
    Project_09_Facial_Expression_LED_Board
    Project_10_Restricting_Smart_Car
    Project_11_Line_Tracking_Smart_Car
    Project_12_Ultrasonic_Following_Smart_Car
    Project_13_Ultrasonic_Obstacle_Avoidance_Smart_Car
    Project_14_IR_Remote_Control_Smart_Car
    Project_15_Bluetooth_Control_Smart_Car
    Project_16_Bluetooth_Speed_Control_Smart_Car
    Project_17_Multi_purpose_Bluetooth_Smart_Car



.. |image1| image:: ./media/A5.jpeg